Version: | 1.0.0A |
---|---|
Copyright: | (C)2016 Avnet Silica company |
Date: | 30 may 2014 |
Avnet Silica Liberty board is designed to evaluate BlueTooth Low Energy performance. The main processor is a Renesas R5F100EGANA. The board is also equiped with one ML7105 Lapis BLE module, one KXTJ2-1009 Kionix Accelerometer, one BD1020HFV Rohm Temperature sensor and one SMLP34RGB1W Rohm RGB led.
Using a TTL-USB converter connected with UART_TX_OUT signal of 6 pins header and a Terminal SW on the PC (such as HyperTerminal) it’s possible to see a “dump” of all data ‘send to’ and ‘received from’ ML7105 module.
BLE_lapis FW project is based on VSSPP_ML610QXXX_Ver0_094_beta firmware revision developed for Lapis PEXL7105_WSN kit and adapted for Avnet Silica Liberty Board. It is adapted for VSP application; no test has been made for VSSPP application.
Note
Registration and login to Renesas and KPIT site are needed before using link above to download
Important
e2studio 2.2.0.13 or KPIT GNURL78 13.02-ELF-MP1 are also available on request. In this case, you must register at Renesas and KPIT official sites for license activaction
Important
After registration on KPIT site, you receive email such as follow:
Please, note that YourCode is requested during first time GNUKPIT installation!!
You can also find a video guide here
Firmware project is included into Liberty.zip archive file
Reference guide and datasheet are included into Liberty_doc.zip archive file and are:
Reference Document | Description |
---|---|
PEDK71050-02-02.pdf | ML7105 Module DataSheet (used in this project) |
FEXL7105_BACI_Manual-01.pdf | ML7105_Baci_interface_specifications |
FEXL7105_AppDevelopersGuide-01.pdf | Using BACI interface with ML7105 |
FEUL7105-01.pdf | ML7105 User’s Manual |
FEDL7105-002-01.pdf | ML7105 DataSheet |
Inside Liberty_doc.zip there are 3 other folders:
- ML7105_kit folder that contains:
Reference Document | Description |
---|---|
FEXL7105_WSNapp-01.pdf | ML7105 WSN Lapis kit user’s manual |
PEXL7105_VSP_IF-01.pdf | ML7105 WSN Lapis VSP software interface |
PEXL7105_VSSPP-UG-01.pdf | ML7105 WSN Lapis VSSPP guide |
PEXL7105_WSN_HardManual-03.pdf | ML7105 Lapis kit hardware manual |
- e2studio folder that contains:
Reference Document | Description |
---|---|
r20ut2771ej0100_e2_start_s.pdf | e2studio quick start |
- DataSheet folder that contains:
Reference Document | Description |
---|---|
bd1020hfv-e.pdf | Temperature sensor IC |
KXTJ2-1009 Specification Rev 4.pdf | Accelerometer |
RL78_G13_Hardware.pdf | Renesas RL78 series hardware manual |
SMLP34RGBxW_last.pdf | RGB Led |
Liberty_doc.zip contents - see image below
You can download the Liberty.zip and Liberty_doc.zip accessing to Avnet Silica Architech website (registration is needed for download)
Installing E2studio and KPIT Developement Suite chapter will guide you through the basic steps of the installation procedure of Developement Suite
We suggest you to read first the Quick Start Guide to perform a correct setup.
This guide explains how to use this application and provides an overview of the structure of the project firmware
Contents: